24V 1.5KW vertical Forklift AGV Mecanum Wheel with steering from Factory
|335 Steering Wheel Parameter Table|
|6||Traction motor||W||100-2000||Select on demand|
|7||Steering motor||W||100-400||Select on demand|
|8||Steering ratio||/||1:20/1:30/1:35/1:40||Select on demand|
|9||Motor Voltage||V||DC24/48, AC220||Select on demand|
|12||Steering limit sensor||/||NPN/PNP||Select on demand|
|13||Brake||V||24/48||Select on demand|
The drive wheel is designed for internal use on battery-operated vehicles ( fork lift trucks, self –propelled vehicles, AGV’S guided or guide wire).
It is generally mounted to a fixed support in a horizontal position of the drive motor.It can rotate 360 degrees, but generally are mounted mechanical stops or electromechanical switch to reduce the degrees of rotation.
The drive wheel is designed for indoor use.
The drive gear is lubricated with grease, using grinded gear to minimize noise.
The ZL-335 new vertical steering wheel is a steering wheel with a small turning space. The single wheel has a rated load of 1 ton. It is mainly used in car bodies with limited installation space. The turning diameter is only 225mm. The steering wheel adopts an independent patented parallel planetary reduction transmission structure, which has a small space and a large speed ratio, low noise and strong impact resistance; different wheel diameters, speed ratios, different motor brands, motor types, power sizes, and Voltage, control feedback sensor and wheel surface material, etc., adapt to the differentiated needs of control.